When ordering, please write what bike you have and the battery in the Notes Section of your order. For example: "CrossCurrent X 52V"
A LCD display for all E-bikes. It has many features including Cruise Control, Throttle Assist Boost, Low Voltage Limit Pre-set and Advanced Metrics View Mode to name a few. Some of these features are not right away obvious. Click here to see the user manual for the LCD display.
52V Compatible with the following bikes:
Below is a video that can help you quickly understand your display on your Juiced e-bike.
LCD Advanced Metric Display (Included)
Pixels: 120 x 64
Customized interface with 3-button layout
6 levels of assist: 0, ECO, 1, 2, 3, SPORT, Race
Basic and Advanced display modes
Water resistant IP65
Backlit illuminated display
5 Pin quick-connect cable with brass lock-ring
Electric Assist Functions Additional Functions Throttle-Assist Boost (TAB)
Instantly add up 1,000W (20 Amps) of boost when pedaling and simultaneously holding down the throttle. TAB is available in any assist setting from 0mph up to 20mph.
Active Cruise Control Function
Locks in any speed below 20mph. Speed will be maintained without pedaling or using the throttle until the brake is applied, pushing any button or giving additional throttle input. Pedaling can increase the speed, but the e-bike will return to the pre-set speed if pedaling stops.
Push-button throttle limited to 6kmh to assist when pushing or walking the bike.
LED Headlight Control
Turn on or off the LED.headlight from the display console.
Display Backlight Control
Turn on the display’s backlight to see the screen at night.
Torque Sensor Deactivation Function
Turn off the torque sensor signal. The pedal assist will only use the cadence sensor input for boost level calculations.
Set the maximum speed limit of the throttle or pedal assist system.
Assist Level Limiter
Limit the maximum assist level which can be selected: ECO, 1, 2, 3, SPORT.
Low Voltage Limiter
Set the lowest voltage allowed by the electric drive system. This is used to control how deeply the battery is allowed to discharge.
Display Brightness Level
Set the brightness level of the display.
Wheel Circumference Input
Set the precise wheel circumference in 11mm increments.
Race Track Mode
This mode is activated by manually setting the speed limit above 28mph. The top speed will be limited by the power available to the motor. Use this setting on non-public roads only.
Power Off Delay
Set the duration of inactivity before the bike automatically turns off to conserve energy.