- High-Performance Metal Ceramic Compound
- Fits Tektro Dorado (HD-E710) fully hydraulic E-Bike specific disc brakes
- Includes return spring
- Designed for 45km/h E-Bikes
- NOT COMPATIBLE with Tektro Dorado HD-E715
Tektro D40.11 brake pads are intended for use with the Tektro Dorado (HD-E710) hydraulic disc brakes for E-Bikes. For use with 180mm rotor. Each set replaces the inside and outside pads for one (1) wheel. To replace the pads for one bike, you will need two (2) sets.
How to identify your brake pad type
Start by identifying which brake system is on your bike. The easiest way is to look at the lever. The table above will help you identify the brake system based on the lever design. You can also look at the caliper to confirm the brake system type. Take note of the pad type in the last two columns. Most of our e-bike use the Shimano B01S compatible pad.
Tektro HD-E715 vs. HD-E710
These two brake systems appear alike, however, they are different. The brake pads are not interchangeable between the models. The HD-E710 has a larger pad which is more difficult to find online and at your local bicycle repair shop. The HD-E715 uses the commonly available Shimano B01S brake pad. Check the marking on the lever to determine which 700-series brake system you have.
